Standard Auto Catch Headgate & Squeeze Chute
Usage Instructions

Back to Southern States Squeeze Chute and Auto Headgate

Note
Make sure to grease fittings before each use.
Before first and each use thoroughly grease all eight grease fittings on chute.
Step 1 Before Using Chute
Prepare squeeze chute to receive animal.
Using squeeze release mechanism, release squeeze and pull up or down on large squeeze handle to get desired top width. It should be fairly wide when catching cattle and then squeeze applied after animal is caught.
Step 2 Automatic Headgate & Chute Operation
Prepare headgate to receive animal. To set headgate for catching animal, pull back on release handle. Headgate should move inwards to “ready-to-catch” position.
Step 3
Make adjustments as necessary.
Use T-handle adjustment bar to set desired width for catching animals. In “ready-to-catch” position, chute should be set so only animal’s head can fit through opening of chute. Note: Width may also be further adjusted by removing pins on top and bottom of neck boards and sliding doors in or out as necessary.
Step 4
Raise tailgate.
Using black handle on vertical tailgate ropes, pull sharply and swiftly to raise vertical tailgate. Once tailgate pin passes the top “stop” hole, release handle so tailgate will catch and stop in upright position.
Step 5
Practice lowering tailgate.
To release tailgate, pull sharply on rope to release pin and hold pressure on rope until pin passes stop hole. Then, release rope to allow tailgate to drop completely. This will take a few “practice” runs to master.
Step 6
When animal strikes neck boards, chute will automatically latch, securing animal in chute.
Step 7
Release animal by swinging doors outward.
Once work is completed, lift up on catch handle and using lower swing handle, swing doors outward to release animal.
Step 8
Doors latch automatically when shut.
To close, pull lever handle forward to swing doors shut. They will latch automatically. Repeat step 2 to put headgate back in “ready-to-catch” position.
Step 9 Access Features
Access various parts of the animal by dropping the desired horseshoe access door.
To access various parts of the animal, drop the desired horseshoe access door by releasing access lock on top of horseshoe.
Step 10
Access hooves and legs by folding out and removing lower access door.
To access lower part of animal, release tabs on bottom door and fold door out. Note: Once door is folded down, it can be removed completely by simply lifting up on door.
Step 11
Sort or release large animals by opening right side of chute.
For larger animal release or for sorting, animals can be released from right-hand side of chute. To release, pull black handle door release and door will swing open.
To close, pull handle toward you until door latches.

Back to Southern States Squeeze Chute and Auto Headgate